Engineered Series Microphones
ES935S/ML
Designed
for quality sound reinforcement, professional recording, television and other
demanding sound pickup applications .
Mute switch in base lights to indicate operational status of the microphone.
Low-profile element provides uniform MicroLine® polar pattern with narrow 90º acceptance angle.
Unobtrusive design with an overall length of only 12.20" (310.0 mm).
Plugs into any standard XLRF-type connector, or direct mounts to 5/8"-27 stands using included thread-mount adapter.
Available interchangeable elements permit angle of acceptance from 90º to 360º.
Small diameter gooseneck permits highly flexible positioning while maintaining smooth, contoured appearance.
ES935S/ML Specifications
Element: Condenser
Dynamic Range (Typical): 107 dB, 1 kHz at Max. SPL
Polar Pattern: MicroLine®
Phantom Power Requirements: 11 - 52V, 4 mA typical
Frequency Response: 30 - 20,000 Hz
Switches: Flat/low-roll-off; Mute
Open Circuit Sensitivity: -35 dB (17.7 mV) re 1V at 1 Pa
Low Frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 250 ohms
Weight: 3.2 oz (90 g)
Maximum Input Sound Level: 133 dB SPL, 1 kHz at 1% T.H.D.
Power Module: Integral
Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
Output Connector: XLRM-type
Dimensions: 12.20" (310.0 mm) long; 0.31" (8.0 mm) head diameter; 0.74" (18.9 mm) base diameter
ES917S/ML
Long gooseneck version
Specifications identical to ES935S/ML except for dimensions and weight.
Weight: 4.0 oz (113 g)
Dimensions: 22.13" (562.0 mm) long; 0.31" (8.0 mm) head diameter; 0.74" (18.9 mm) base diameter
ES933/ML
Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
Small size and excellent response are ideal for suspension over choirs, instrumental groups and theater stages
Low-profile element provides uniform MicroLine® polar pattern with narrow 90º acceptance angle
Available interchangeable elements permit angle of acceptance from 90º to 360º
50' (15.2 m) cable permanently attached to mic, screw terminals at power module
Also available in white as ES933W/ML
ES933/ML Specifications
Element: Condenser
Dynamic Range (Typical): 107 dB, 1 kHz at Max. SPL
Polar Pattern: MicroLine®
Phantom Power Requirements: 11 - 52V, 4 mA typical
Frequency Response: 30 - 20,000 Hz
Switches: Flat/low-roll-off; Mute
Open Circuit Sensitivity: -35 dB (17.7 mV) re 1V at 1 Pa
Low Frequency Roll-off: 80 Hz, 12 dB per octave
Impedance: 250 ohms
Weight: 0.5 oz (14 g)
Maximum Input Sound Level: 133 dB SPL, 1 kHz at 1% T.H.D.
Power Module: In-line
Signal to Noise Ratio: 68 dB, 1 kHz at 1 Pa
Output Connector: XLRM-type (power module)
Dimensions: 5.60" (142.3 mm) long; 0.31" (8.0 mm) head diameter
ES961
Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing
Low-profile design for minimum visibility
Heavy die-cast case and rubber bottom pad minimize coupling of surface vibration to the microphone
25' (7.6 m) detachable cable (TA3F to XLRM-type)
Also available in white as ES961W
ES961 Specifications
Element: Condenser
Dynamic Range (Typical): 103 dB, 1 kHz at Max. SPL
Polar Pattern: Unidirectional
Phantom Power Requirements: 9 - 52V, 2 mA typical
Frequency Response: 30 - 20,000 Hz
Switch: Flat/low-roll-off
Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V at 1 Pa
Low Frequency Roll-off: 150 Hz, 6 dB per octave
Impedance: 200 ohms
Weight: 5.1 oz (145 g)
Maximum Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
Power Module: Integral
Signal to Noise Ratio: 67 dB, 1 kHz at 1 Pa
Output Connector: XLRM-type on cable
Dimensions: 3.59" (91.3 mm) maximum length; 2.87" (73.0 mm) maximum body width
